INTEGREX e-420H-ST II

MACHINE DESCRIPTION:

INTEGREX e-420H-ST II Multi-Tasking Machining Center is a complete fusion of CNC turning center and machining center, forming by far the most advanced Multi-Tasking machine in the industry.

Complete all operations in a single setup – turning, milling, boring, drilling and more with Mazak's Done-In-One capability. The machine delivers precision, performance, pinch turning and simultaneous machining of two chucker workpieces or synchronize turning spindles for large shaft applications. The large machining envelope both above and below centerline accommodates a wide range of applications.

MACHINE CHARACTERISTICS:

  • Milling spindle B-axis travel -30 ~ 210 degrees (.0001 degree min index angle)
  • Available 2.5k 40HP 5.2” spindle bore (option)
  • Identical second spindle for Done-In-One part processing
  • Lower turret with or without Y-axis for machining at either main or second turning spindle
  • Full C-axis contouring for both turning spindles (.0001 degree minimum index)
  • 80 or 120 automatic tool changer options available
  • Below centerline X-axis travel increases part accuracy

Machine Specifications

Specification Bed Length - 80 in
Capacity Maximum Swing 670 mm / 26.38 in
Maximum Machining Diameter 670 mm / 26.380 in
Maximum Bar Work Capacity 77 mm / 3.0 in
Maximum Machining Length 2027 mm / 79.800 in
Main Spindle Maximum Speed 4000 rpm
Motor Output (30 minute rating) 30 kw / 40.0 hp
Second Spindle Maximum Speed 4000 rpm
Motor Output (30 minute rating) 30 kw / 40.0 hp
Milling Spindle B-Axis Travel 240°
Magazine Capacity 40
Maximum Speed 12000 rpm
Motor Output (15 minute rating) 22 kw / 30.0 hp
Feed Axes Travel (X Axis) 845 mm / 33.27 in
Travel (X2 Axis) 232 mm / 9.13 in
Travel (Y Axis) 420 mm / 16.54 in
Travel (Z Axis) 2088 mm / 82.20 in
Travel (Z2 Axis) 1893 mm / 74.53 in
Travel (W Axis) 1963 mm / 77.28 in